Updating the HBA FCode

To update your FCode support, follow these steps:

1. Make sure you have updated the firmware (as described under

2. Copy the appropriate file for Open Boot support from the

CD-ROM or the Emulex website to the appropriate directory,

/usr/sbin/lpfc

:

3. Start the FCode update utility:

./lputil

4. Select option

3 – Firmware Maintenance.

5. Select the adapter number to update.

6. Select the appropriate option:

7. Enter the full file name of the image file.

8. Select option

0 – Return to Main Menu.

9. Repeat steps

Step 4 through Step 8 for any other adapters.

HBA model File

LP8000E-EMC

DOXXX.PRG (where XXX is the version; for example: DO140A0.PRG)

LP9002-E

LP9002C-E

LP9002DC-E

CO

XXX.PRG (where XXX is the version; for example: CO140A0.PRG)

LP9002S-E

TSCXXX.PRG (where XXX is the version; for example: TSC240A0.PRG)

LP9802-E

HOXXX.PRG (where XXX is the version; for example: HO140A0.PRG)

LP10000-E

LP10000DC-E

TO

XXX.PRG (where XXX is the version; for example: TO140A0.PRG)

HBA Bus Select:

PCI

1 – Load Firmware Image

SBus

6 – Load FCode Image

46

EMC Fibre Channel with Emulex Host Bus Adapters in the Solaris Environment

Installing and Configuring the HBA and Driver

10. Type

reboot -- -r and press ENTER to reboot the host with the -r

Note :

Make sure your storage array device path is

/pci/lpfc. If you see that

the path is

/pci/fibre_channel, you must download the Fcode again

and reboot the system with the command reboot -- -rv.

(reconfigure) option.