1. WHAT ARE THE BENEFITS OF FIBRE CHANNEL SANS?
Fibre Channel SANs are the de facto standard for storage networking in the corporate data center because they provide exceptional reliability, scalability, consolidation, and performance. Fibre Channel SANs provide significant advantages over direct-attached storage through improved storage utilization, higher data availability, reduced management costs, and highly scalable capacity and performance.
LAN hardware and operating systems are geared to user traffic, and LANs are tuned for a fast user response to messaging requests.
With a SAN, the storage units can be secured separately from the servers and totally apart from the user network enhancing storage access in data blocks (bulk data transfers), advantageous for server-less backups.
"Redundant Array of Inexpensive Disks"
Depending on how we configure the array, we can have the
- data mirrored [RAID 1] (duplicate copies on separate drives)
- striped [RAID 0] (interleaved across several drives), or
- parity protected [RAID 5](extra data written to identify errors).
These can be used in combination to deliver the balance of performance and reliability that the user requires.
RAID 1+0 (Stripped Mirrored)
2. WHAT ENVIRONMENT IS MOST SUITABLE FOR FIBRE CHANNEL SANS?
Typically, Fibre Channel SANs are most suitable for large data centers running business-critical data, as well as applications that require high-bandwidth performance such as medical imaging, streaming media, and large databases. Fibre Channel SAN solutions can easily scale to meet the most demanding performance and availability requirements.
Typically, Fibre Channel SANs are most suitable for large data centers running business-critical data, as well as applications that require high-bandwidth performance such as medical imaging, streaming media, and large databases. Fibre Channel SAN solutions can easily scale to meet the most demanding performance and availability requirements.
3. WHAT CUSTOMER PROBLEMS DO FIBRE CHANNEL SANS SOLVE?
The increased performance of Fibre Channel enables a highly effective backup and recovery approach, including LAN-free and server-free backup models. The result is a faster, more scalable, and more reliable backup and recovery solution. By providing flexible connectivity options and resource sharing, Fibre Channel SANs also greatly reduce the number of physical devices and disparate systems that must be purchased and managed, which can dramatically lower capital expenditures. Heterogeneous SAN management provides a single point of control for all devices on the SAN, lowering costs and freeing personnel to do other tasks.
The increased performance of Fibre Channel enables a highly effective backup and recovery approach, including LAN-free and server-free backup models. The result is a faster, more scalable, and more reliable backup and recovery solution. By providing flexible connectivity options and resource sharing, Fibre Channel SANs also greatly reduce the number of physical devices and disparate systems that must be purchased and managed, which can dramatically lower capital expenditures. Heterogeneous SAN management provides a single point of control for all devices on the SAN, lowering costs and freeing personnel to do other tasks.
4. HOW LONG HAS FIBRE CHANNEL BEEN AROUND?
Development started in 1988, ANSI standard approval occurred in 1994, and large deployments began in 1998. Fibre Channel is a mature, safe, and widely deployed solution for high-speed (1 GB, 2 GB, 4 GB) communications and is the foundation for the majority of SAN installations throughout the world.
Development started in 1988, ANSI standard approval occurred in 1994, and large deployments began in 1998. Fibre Channel is a mature, safe, and widely deployed solution for high-speed (1 GB, 2 GB, 4 GB) communications and is the foundation for the majority of SAN installations throughout the world.
5. WHAT IS THE FUTURE OF FIBRE CHANNEL SANS?
Fibre Channel is a well-established, widely deployed technology with a proven track record and a very large installed base, particularly in high-performance, business-critical data center environments. Fibre Channel SANs continue to grow and will be enhanced for a long time to come. The reduced costs of Fibre Channel components, the availability of SAN kits, and the next generation of Fibre Channel (4 GB) are helping to fuel that growth. In addition, the Fibre Channel roadmap includes plans to double performance every three years
Fibre Channel is a well-established, widely deployed technology with a proven track record and a very large installed base, particularly in high-performance, business-critical data center environments. Fibre Channel SANs continue to grow and will be enhanced for a long time to come. The reduced costs of Fibre Channel components, the availability of SAN kits, and the next generation of Fibre Channel (4 GB) are helping to fuel that growth. In addition, the Fibre Channel roadmap includes plans to double performance every three years
6. WHAT ARE THE BENEFITS OF 4GB FIBRE CHANNEL?
Benefits include twice the performance with little or no price increase, investment protection with backward compatibility to 2 GB, higher reliability due to fewer SAN components (switch and HBA ports) required, and the ability to replicate, back up, and restore data more quickly. 4 GB Fibre Channel systems are ideally suited for applications that need to quickly transfer large amounts of data such as remote replication across a SAN, streaming video on demand, modeling and rendering, and large databases. 4 GB technology is shipping today.
Benefits include twice the performance with little or no price increase, investment protection with backward compatibility to 2 GB, higher reliability due to fewer SAN components (switch and HBA ports) required, and the ability to replicate, back up, and restore data more quickly. 4 GB Fibre Channel systems are ideally suited for applications that need to quickly transfer large amounts of data such as remote replication across a SAN, streaming video on demand, modeling and rendering, and large databases. 4 GB technology is shipping today.
7. HOW IS FIBRE CHANNEL DIFFERENT FROM ISCSI?
Fibre Channel and iSCSI each have a distinct place in the IT infrastructure as SAN alternatives to DAS. Fibre Channel generally provides high performance and high availability for business-critical applications, usually in the corporate data center. In contrast, iSCSI is generally used to provide SANs for business applications in smaller regional or departmental data centers.
Fibre Channel and iSCSI each have a distinct place in the IT infrastructure as SAN alternatives to DAS. Fibre Channel generally provides high performance and high availability for business-critical applications, usually in the corporate data center. In contrast, iSCSI is generally used to provide SANs for business applications in smaller regional or departmental data centers.
8. WHEN SHOULD I DEPLOY FIBRE CHANNEL INSTEAD OF ISCSI?
For environments consisting of high-end servers that require high bandwidth or data center environments with business-critical data, Fibre Channel is a better fit than iSCSI. For environments consisting of many midrange or low-end servers, an IP SAN solution often delivers the most appropriate price/performance.
For environments consisting of high-end servers that require high bandwidth or data center environments with business-critical data, Fibre Channel is a better fit than iSCSI. For environments consisting of many midrange or low-end servers, an IP SAN solution often delivers the most appropriate price/performance.
9. Name some of the SAN topologies
Point-to-point, arbitrated loop, and switched fabric topologies
10. What's the need for separate network for storage why LAN cannot be used?
LAN hardware and operating systems are geared to user traffic, and LANs are tuned for a fast user response to messaging requests.
With a SAN, the storage units can be secured separately from the servers and totally apart from the user network enhancing storage access in data blocks (bulk data transfers), advantageous for server-less backups.
11. What are the advantages of RAID?
"Redundant Array of Inexpensive Disks"
Depending on how we configure the array, we can have the
- data mirrored [RAID 1] (duplicate copies on separate drives)
- striped [RAID 0] (interleaved across several drives), or
- parity protected [RAID 5](extra data written to identify errors).
These can be used in combination to deliver the balance of performance and reliability that the user requires.
12. Define RAID? Which one you feel is good choice?
RAID (Redundant array of Independent Disks) is a technology to achieve redundancy with faster I/O. There are Many Levels of RAID to meet different needs of the customer which are: R0, R1, R3, R4, R5, R10, R6.
Generally customer chooses R5 to achieve better redundancy and speed and it is cost effective.
RAID (Redundant array of Independent Disks) is a technology to achieve redundancy with faster I/O. There are Many Levels of RAID to meet different needs of the customer which are: R0, R1, R3, R4, R5, R10, R6.
Generally customer chooses R5 to achieve better redundancy and speed and it is cost effective.
R0 – Striped set without parity/[Non-Redundant Array].
Provides improved performance and additional storage but no fault tolerance. Any disk failure destroys the array, which becomes more likely with more disks in the array. A single disk failure destroys the entire array because when data is written to a RAID 0 drive, the data is broken into fragments. The number of fragments is dictated by the number of disks in the drive. The fragments are written to their respective disks simultaneously on the same sector. This allows smaller sections of the entire chunk of data to be read off the drive in parallel, giving this type of arrangement huge bandwidth. RAID 0 does not implement error checking so any error is unrecoverable. More disks in the array means higher bandwidth, but greater risk of data loss
R1 - Mirrored set without parity.
Provides fault tolerance from disk errors and failure of all but one of the drives. Increased read performance occurs when using a multi-threaded operating system that supports split seeks, very small performance reduction when writing. Array continues to operate so long as at least one drive is functioning. Using RAID 1 with a separate controller for each disk is sometimes called duplexing.
R3 - Striped set with dedicated parity/Bit interleaved parity.
This mechanism provides an improved performance and fault tolerance similar to RAID 5, but with a dedicated parity disk rather than rotated parity stripes. The single parity disk is a bottle-neck for writing since every write requires updating the parity data. One minor benefit is the dedicated parity disk allows the parity drive to fail and operation will continue without parity or performance penalty.
R4 - Block level parity.
Identical to RAID 3, but does block-level striping instead of byte-level striping. In this setup, files can be distributed between multiple disks. Each disk operates independently which allows I/O requests to be performed in parallel, though data transfer speeds can suffer due to the type of parity. The error detection is achieved through dedicated parity and is stored in a separate, single disk unit.
R5 - Striped set with distributed parity.
Distributed parity requires all drives but one to be present to operate; drive failure requires replacement, but the array is not destroyed by a single drive failure. Upon drive failure, any subsequent reads can be calculated from the distributed parity such that the drive failure is masked from the end user. The array will have data loss in the event of a second drive failure and is vulnerable until the data that was on the failed drive is rebuilt onto a replacement drive.
R6 - Striped set with dual distributed Parity.
Provides fault tolerance from two drive failures; array continues to operate with up to two failed drives. This makes larger RAID groups more practical, especially for high availability systems. This becomes increasingly important because large-capacity drives lengthen the time needed to recover from the failure of a single drive. Single parity RAID levels are vulnerable to data loss until the failed drive is rebuilt: the larger the drive, the longer the rebuild will take. Dual parity gives time to rebuild the array without the data being at risk if one drive, but no more, fails before the rebuild is complete.
13. What is the difference between RAID 0+1 and RAID 1+0
RAID 0+1 (Mirrored Stripped)
In this RAID level all the data is saved on stripped volumes which are in turn mirrored, so any disk failure saves the data loss but it makes whole stripe unavailable. The key difference from RAID 1+0 is that RAID 0+1 creates a second striped set to mirror a primary striped set. The array continues to operate with one or more drives failed in the same mirror set, but if drives fail on both sides of the mirror the data on the RAID system is lost. In this RAID level if one disk is failed full mirror is marked as inactive and data is saved only one stripped volume.
RAID 1+0 (Stripped Mirrored)
In this RAID level all the data is saved on mirrored volumes which are in turn stripped, so any disk failure saves data loss. The key difference from RAID 0+1 is that RAID 1+0 creates a striped set from a series of mirrored drives. In a failed disk situation RAID 1+0 performs better because all the remaining disks continue to be used. The array can sustain multiple drive losses so long as no mirror loses both its drives.
This RAID level is most preferred for high performance and high data protection because rebuilding of RAID 1+0 is less time consuming in comparison to RAID 0+1.
14. When JBOD's are used?
"Just a Bunch of Disks"
It is a collection of disks that share a common connection to the server, but don't include the mirroring,
striping, or parity facilities that RAID systems do, but these capabilities are available with host-based software.
It is a collection of disks that share a common connection to the server, but don't include the mirroring,
striping, or parity facilities that RAID systems do, but these capabilities are available with host-based software.
15. Differentiate RAID & JBOD?
RAID: "Redundant Array of Inexpensive Disks"
Fault-tolerant grouping of disks that server sees as a single disk volume
Combination of parity-checking, mirroring, striping
Self-contained, manageable unit of storage
RAID: "Redundant Array of Inexpensive Disks"
Fault-tolerant grouping of disks that server sees as a single disk volume
Combination of parity-checking, mirroring, striping
Self-contained, manageable unit of storage
JBOD: "Just a Bunch of Disks"
Drives independently attached to the I/O channel
Scalable, but requires server to manage multiple volumes
Do not provide protection in case of drive failure
Drives independently attached to the I/O channel
Scalable, but requires server to manage multiple volumes
Do not provide protection in case of drive failure
16. What is a HBA?
Host bus adapters (HBAs) are needed to connect the server (host) to the storage.
17. What are the advantages of SAN?
Massively extended scalability
Greatly enhanced device connectivity
Storage consolidation
LAN-free backup
Server-less (active-fabric) backup
Server clustering
Heterogeneous data sharing
Disaster recovery - Remote mirroring
While answering people do NOT portray clearly what they mean & what advantages each of them have, which are cost effective & which are to be used for the client's requirements.
Massively extended scalability
Greatly enhanced device connectivity
Storage consolidation
LAN-free backup
Server-less (active-fabric) backup
Server clustering
Heterogeneous data sharing
Disaster recovery - Remote mirroring
While answering people do NOT portray clearly what they mean & what advantages each of them have, which are cost effective & which are to be used for the client's requirements.
18. What is the difference b/w SAN and NAS?
The basic difference between SAN and NAS, SAN is Fabric based and NAS is Ethernet based.
SAN - Storage Area Network
The basic difference between SAN and NAS, SAN is Fabric based and NAS is Ethernet based.
SAN - Storage Area Network
It accesses data on block level and produces space to host in form of disk.
NAS - Network attached Storage
It accesses data on file level and produces space to host in form of shared network folder.
19. What is a typical storage area network consists of - if we consider it for implementation in a small business setup?
If we consider any small business following are essentials components of SAN
- Fabric Switch
- FC Controllers
- JBOD's
- Fabric Switch
- FC Controllers
- JBOD's
20. Can you briefly explain each of these Storage area components?
Fabric Switch: It's a device which interconnects multiple network devices .There are switches starting from 16 port to 32 ports which connect 16 or 32 machine nodes etc. vendors who manufacture these kind of switches are Brocade, McData.
21. FC Controllers: These are Data transfer media they will sit on PCI slots of Server; you can configure Arrays and volumes on it.
JBOD: Just Bunch of Disks is Storage Box, it consists of Enclosure where set of hard-drives are hosted in many combinations such SCSI drives, SAS, FC, SATA.
JBOD: Just Bunch of Disks is Storage Box, it consists of Enclosure where set of hard-drives are hosted in many combinations such SCSI drives, SAS, FC, SATA.
22. What is the most critical component in SAN?
Each component has its own criticality with respect to business needs of a company.
23. How is a SAN managed?
There are many management software's used for managing SAN's to name a few
- Santricity
- IBM Tivoli Storage Manager.
- CA Unicenter.
- Veritas Volumemanger.
There are many management software's used for managing SAN's to name a few
- Santricity
- IBM Tivoli Storage Manager.
- CA Unicenter.
- Veritas Volumemanger.
24. Which one is the Default ID for SCSI HBA?
Generally the default ID for SCSI HBA is 7.
SCSI- Small Computer System Interface
HBA - Host Bus Adaptor
Generally the default ID for SCSI HBA is 7.
SCSI- Small Computer System Interface
HBA - Host Bus Adaptor
25. What is the highest and lowest priority of SCSI?
There are 16 different ID's which can be assigned to SCSI device 7, 6, 5, 4, 3, 2, 1, 0, 15, 14, 13, 12, 11, 10, 9, 8.
Highest priority of SCSI is ID 7 and lowest ID is 8.
26. How do you install device drivers for the HBA first time during OS installation?
In some scenarios you are supposed to install Operating System on the drives connected thru SCSI HBA or SCSI RAID Controllers, but most of the OS will not be updated with drivers for those controllers, that time you need to supply drivers externally, if you are installing windows, you need to press F6 during the installation of OS and provide the driver disk or CD which came along with HBA.
If you are installing Linux you need to type "linux dd" for installing any driver.
In some scenarios you are supposed to install Operating System on the drives connected thru SCSI HBA or SCSI RAID Controllers, but most of the OS will not be updated with drivers for those controllers, that time you need to supply drivers externally, if you are installing windows, you need to press F6 during the installation of OS and provide the driver disk or CD which came along with HBA.
If you are installing Linux you need to type "linux dd" for installing any driver.
27. What is Array?
Array is a group of Independent physical disks to configure any Volumes or RAID volumes.
Array is a group of Independent physical disks to configure any Volumes or RAID volumes.
28. Can u describe at-least 3 troubleshooting scenarios which you have come across in detail ?
SCENARIO 1: How do you find/debug when there is error while working SCSI devices?
In our daily SAN troubleshooting there are many management and configuration tools we use them to see when there is a failure with target device or initiator device.
Some time it is even hard to troubleshoot some of the things such as media errors in the drives, or some of the drives taking long time to spin-up. In such cases these utilities will not come to help. To debug this kind of information most of the controller will be implemented with 3-pin serial debug port. With serial port debug connector cable you can collect the debug information with hyper terminal software.
SCENARIO 2: I am having an issue with a controller its taking lot of time to boot and detect all the drives connected how can I solve this.?
There are many possibilities that might cause this problem. One of the reason might be you are using bad drives that cannot be repaired. In those cases you replace the disks with working ones.
Another reason might be slots you connected your controller to a slot which might not be supported.
Try to connect with other types of slots.
One more probable reason is if you have flashed the firmware for different OEM's on the same hardware.
To get rid of this the flash utilities will be having option to erase all the previous and EEPROM and boot block entry option. Use that option to rectify the problem.
SCENARIO 3: I am using tape drive series 700X, even the vendor information on the Tape drive says 700X, but the POST information while booting the server is showing as 500X what could be the problem?
First you should make sure your hardware is of which series, you can find out this in the product website.
Generally you can see this because in most of the testing companies they use same hardware to test different series of same hardware type. What they do is they flash the different series firmware. You can always flash back to exact hardware type.
SCENARIO 1: How do you find/debug when there is error while working SCSI devices?
In our daily SAN troubleshooting there are many management and configuration tools we use them to see when there is a failure with target device or initiator device.
Some time it is even hard to troubleshoot some of the things such as media errors in the drives, or some of the drives taking long time to spin-up. In such cases these utilities will not come to help. To debug this kind of information most of the controller will be implemented with 3-pin serial debug port. With serial port debug connector cable you can collect the debug information with hyper terminal software.
SCENARIO 2: I am having an issue with a controller its taking lot of time to boot and detect all the drives connected how can I solve this.?
There are many possibilities that might cause this problem. One of the reason might be you are using bad drives that cannot be repaired. In those cases you replace the disks with working ones.
Another reason might be slots you connected your controller to a slot which might not be supported.
Try to connect with other types of slots.
One more probable reason is if you have flashed the firmware for different OEM's on the same hardware.
To get rid of this the flash utilities will be having option to erase all the previous and EEPROM and boot block entry option. Use that option to rectify the problem.
SCENARIO 3: I am using tape drive series 700X, even the vendor information on the Tape drive says 700X, but the POST information while booting the server is showing as 500X what could be the problem?
First you should make sure your hardware is of which series, you can find out this in the product website.
Generally you can see this because in most of the testing companies they use same hardware to test different series of same hardware type. What they do is they flash the different series firmware. You can always flash back to exact hardware type.
29. Which are the SAN topologies?
SAN can be connected in 3 types which are mentioned below:
Point to Point topology
FC Arbitrated Loop ( FC :Fibre Channel )
Switched Fabric
SAN can be connected in 3 types which are mentioned below:
Point to Point topology
FC Arbitrated Loop ( FC :Fibre Channel )
Switched Fabric
30. Which are the 4 types of SAN architecture types
a. Core-edge
b. Full-Mesh
c. Partial-Mesh
d. Cascade
b. Full-Mesh
c. Partial-Mesh
d. Cascade
31. Which command is used in linux to know the driver version of any hardware device?
dmesg
32. How many minimum drives are required to create R5 (RAID 5) ?
You need to have at least 3 disk drives to create R5.
33. Can you name some of the states of RAID array?
There are states of RAID arrays that represent the status of the RAID arrays which are given below
a. Online
b. Degraded
c. Rebuilding
d. Failed
There are states of RAID arrays that represent the status of the RAID arrays which are given below
a. Online
b. Degraded
c. Rebuilding
d. Failed
34. Name the features of SCSI-3 standard?
QAS: Quick arbitration and selection
Domain Validation
CRC: Cyclic redundancy check
Domain Validation
CRC: Cyclic redundancy check
35. Can we assign a hot spare to R0 (RAID 0) array?
No, since R0 is not redundant array, failure of any disks results in failure of the entire array so we cannot rebuild the hot spare for the R0 array.
36. Can you name some of the available tape media types?
There are many types of tape media available to back up the data some of them are
DLT: digital linear tape - technology for tape backup/archive of networks and servers; DLT technology addresses midrange to high-end tape backup requirements.
LTO: linear tape open; a new standard tape format developed by HP, IBM, and Seagate.
AIT: advanced intelligent tape; a helical scan technology developed by Sony for tape backup/archive of networks and servers, specifically addressing midrange to high-end backup requirements.
There are many types of tape media available to back up the data some of them are
DLT: digital linear tape - technology for tape backup/archive of networks and servers; DLT technology addresses midrange to high-end tape backup requirements.
LTO: linear tape open; a new standard tape format developed by HP, IBM, and Seagate.
AIT: advanced intelligent tape; a helical scan technology developed by Sony for tape backup/archive of networks and servers, specifically addressing midrange to high-end backup requirements.
37. What is HA?
HA High Availability is a technology to achieve failover with very less latency. Its a practical requirement of data centers these days when customers expect the servers to be running 24 hours on all 7 days around the whole 365 days a year - usually referred as 24x7x365. So to achieve this, a redundant infrastructure is created to make sure if one database server or if one app server fails there is a replica Database or Appserver ready to take-over the operations. End customer never experiences any outage when there is a HA network infrastructure.
HA High Availability is a technology to achieve failover with very less latency. Its a practical requirement of data centers these days when customers expect the servers to be running 24 hours on all 7 days around the whole 365 days a year - usually referred as 24x7x365. So to achieve this, a redundant infrastructure is created to make sure if one database server or if one app server fails there is a replica Database or Appserver ready to take-over the operations. End customer never experiences any outage when there is a HA network infrastructure.
38. What is virtualization?
Virtualization is logical representation of physical devices. It is the technique of managing and presenting storage devices and resources functionally, regardless of their physical layout or location. Virtualization is the pooling of physical storage from multiple network storage devices into what appears to be a single storage device that is managed from a central console. Storage virtualization is commonly used in a storage area network (SAN). The management of storage devices can be tedious and time-consuming. Storage virtualization helps the storage administrator perform the tasks of backup, archiving, and recovery more easily, and in less time, by disguising the actual complexity of the SAN.
Virtualization is logical representation of physical devices. It is the technique of managing and presenting storage devices and resources functionally, regardless of their physical layout or location. Virtualization is the pooling of physical storage from multiple network storage devices into what appears to be a single storage device that is managed from a central console. Storage virtualization is commonly used in a storage area network (SAN). The management of storage devices can be tedious and time-consuming. Storage virtualization helps the storage administrator perform the tasks of backup, archiving, and recovery more easily, and in less time, by disguising the actual complexity of the SAN.
39. Describe in brief the composition of FC Frame?
Start of the Frame locator
Frame header (includes destination id and source id, 24 bytes/6 words)
Data Payload (encapsulate SCSI instruction can be 0-2112 bytes in length)
CRC (error checking, 4 bytes)
End of Frame (1 byte)
Frame header (includes destination id and source id, 24 bytes/6 words)
Data Payload (encapsulate SCSI instruction can be 0-2112 bytes in length)
CRC (error checking, 4 bytes)
End of Frame (1 byte)
40. What is storage virtualization?
Storage virtualization is amalgamation of multiple n/w storage devices into single storage unit.
41. What are the protocols used in physical/datalink and network layer of SAN?
a) Ethernet
b) SCSI
c) Fibre Channel
b) SCSI
c) Fibre Channel
42. What are the types of disk array used in SAN?
a) JBOD
b) RAID
b) RAID
43. What are different types of protocols used in transportation and session layers of SAN?
a) Fibre Channel Protocol (FCP)
b) Internet SCSI (iSCSI)
c) Fibre Channel IP (FCIP)
b) Internet SCSI (iSCSI)
c) Fibre Channel IP (FCIP)
44. What is the type of Encoding used in Fibre Channel?
8b/10b, as the encoding technique is able to detect all most all the bit errors
45. How many classes of service are available in Fibre Channel?
7 Classes of service are available in Fibre Channel
Class-1:
Dedicated connection between two communicators with acknowledgement of frame delivery.
In class 1 service, a dedicated connection source and destination is established through the fabric for the duration of the transmission. It provides acknowledged service. This class of service ensures that the frames are received by the destination device in the same order in which they are sent, and reserves full bandwidth for the connection between the two devices. It does not provide for a good utilization of the available bandwidth, since it is blocking another possible contender for the same device. Because of this blocking and necessary dedicated connection, class 1 is rarely used.
Dedicated connection between two communicators with acknowledgement of frame delivery.
In class 1 service, a dedicated connection source and destination is established through the fabric for the duration of the transmission. It provides acknowledged service. This class of service ensures that the frames are received by the destination device in the same order in which they are sent, and reserves full bandwidth for the connection between the two devices. It does not provide for a good utilization of the available bandwidth, since it is blocking another possible contender for the same device. Because of this blocking and necessary dedicated connection, class 1 is rarely used.
Class-2:
connection less but provides acknowledgement
Class 2 is a connectionless, acknowledged service. Class 2 makes better use of available bandwidth since it allows the fabric to multiplex several messages on a frame-by-frame basis. As frames travel through the fabric they can take different routes, so class 2 service does not guarantee in-order delivery. Class 2 relies on upper layer protocols to take care of frame sequence. The use of acknowledgments reduces available bandwidth, which needs to be considered in large-scale busy networks.
connection less but provides acknowledgement
Class 2 is a connectionless, acknowledged service. Class 2 makes better use of available bandwidth since it allows the fabric to multiplex several messages on a frame-by-frame basis. As frames travel through the fabric they can take different routes, so class 2 service does not guarantee in-order delivery. Class 2 relies on upper layer protocols to take care of frame sequence. The use of acknowledgments reduces available bandwidth, which needs to be considered in large-scale busy networks.
Class-3:
connection less and provides no notification of delivery
There is no dedicated connection in class 3 and the received frames are not acknowledged. Class 3 is also called datagram connectionless service. It optimizes the use of fabric resources, but it is now upper layer protocol to ensure that all frames are received in the proper order, and to request to the source device the retransmission of missing frames. Class 3 is a commonly used class of service in Fibre Channel networks.
connection less and provides no notification of delivery
There is no dedicated connection in class 3 and the received frames are not acknowledged. Class 3 is also called datagram connectionless service. It optimizes the use of fabric resources, but it is now upper layer protocol to ensure that all frames are received in the proper order, and to request to the source device the retransmission of missing frames. Class 3 is a commonly used class of service in Fibre Channel networks.
Class-4:
allows fractional bandwidth for virtual circuits
Class 4 is a connection-oriented service like class 1, but the main difference is that it allocates only a fraction of available bandwidth of path through the fabric that connects two N_Ports. Virtual Circuits (VCs) are established between two N_Ports with guaranteed Quality of Service (QoS), including bandwidth and latency. Like class 1, class 4 guarantees in-order delivery frame delivery and provides acknowledgment of delivered frames, but now the fabric is responsible for multiplexing frames of different VCs. Class 4 service is mainly intended for multimedia applications such as video and for applications that allocate an established bandwidth by department within the enterprise. Class 4 was added in the FC-PH-2 standard.
allows fractional bandwidth for virtual circuits
Class 4 is a connection-oriented service like class 1, but the main difference is that it allocates only a fraction of available bandwidth of path through the fabric that connects two N_Ports. Virtual Circuits (VCs) are established between two N_Ports with guaranteed Quality of Service (QoS), including bandwidth and latency. Like class 1, class 4 guarantees in-order delivery frame delivery and provides acknowledgment of delivered frames, but now the fabric is responsible for multiplexing frames of different VCs. Class 4 service is mainly intended for multimedia applications such as video and for applications that allocate an established bandwidth by department within the enterprise. Class 4 was added in the FC-PH-2 standard.
Class -5:
Class 5 is called isochronous service, and it is intended for applications that require immediate delivery of the data as it arrives, with no buffering. It is not clearly defined yet. It is not included in the FC-PH documents.
Class 5 is called isochronous service, and it is intended for applications that require immediate delivery of the data as it arrives, with no buffering. It is not clearly defined yet. It is not included in the FC-PH documents.
Class-6:
Provides multicast, dedicated connection with acknowledgment
Class 6 is a variant of class 1, known as multicast class of service. It provides dedicated connections for a reliable multicast. An N_Port may request a class 6 connection for one or more destinations. A multicast server in the fabric will establish the connections and get acknowledgment from the destination ports, and send it back to the originator. Once a connection is established, it should be retained and guaranteed by the fabric until the initiator ends the connection. Class 6 was designed for applications like audio and video requiring multicast functionality. It appears in the FC-PH-3 standard.
Provides multicast, dedicated connection with acknowledgment
Class 6 is a variant of class 1, known as multicast class of service. It provides dedicated connections for a reliable multicast. An N_Port may request a class 6 connection for one or more destinations. A multicast server in the fabric will establish the connections and get acknowledgment from the destination ports, and send it back to the originator. Once a connection is established, it should be retained and guaranteed by the fabric until the initiator ends the connection. Class 6 was designed for applications like audio and video requiring multicast functionality. It appears in the FC-PH-3 standard.
Class-F:
used for switch to switch communication in the fabric.
Class F service is defined in the FC-SW and FC-SW-2 standard for use by switches communicating through ISLs. It is a connectionless service with notification of non-delivery between E_Ports used for control, coordination, and configuration of the fabric. Class F is similar to class 2; the main difference is that Class 2 deals with N_Ports sending data frames, while Class F is used by E_ports for control and management of the fabric.
used for switch to switch communication in the fabric.
Class F service is defined in the FC-SW and FC-SW-2 standard for use by switches communicating through ISLs. It is a connectionless service with notification of non-delivery between E_Ports used for control, coordination, and configuration of the fabric. Class F is similar to class 2; the main difference is that Class 2 deals with N_Ports sending data frames, while Class F is used by E_ports for control and management of the fabric.
No comments:
Post a Comment