1)Switchshow:
switch26:admin> switchshow
switchName: switch26
switchType: 27.2
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 26
switchId: fffc1a
switchWwn: 10:00:00:05:1e:34:ff:ab
zoning: ON (cfg4)
switchBeacon: ON
Area Port Media Speed State Proto
=====================================
0 0 id N1 Online L-Port 9 public
1 1 id N2 No_Light
2 2 id 2G No_Light
3 3 id N2 No_Light
4 4 id N2 No_Light
5 5 id N1 Online E-Port 10:00:00:60:69:c0:7e:c4 "switch24"
(upstream)
6 6 id N2 No_Light
7 7 id N1 Online E-Port 10:00:00:60:69:c0:7e:c4 "switch24"
switch26:admin>
2)portshow :
switch26:admin> portshow
Usage:
portshow [<SlotNumber>/]<PortNumber>
OR
portshow [ipif|arp|iproute|fciptunnel|iscsi|mode]
[<SlotNumber>/]ge<PortNumber> [<Args>] [<Optional Args>]
Args: all|<tunnel_id> - Show All/<tunnel_id> FCIP tunnels on this GigE port.
Optional Args: -perf Additional performance information.
Valid for portshow fciptunnel only.
-params Connection parameter information.
Valid for portshow fciptunnel only.
-ipsec IKE and IPSec policy information
on IPSec enabled tunnels.
Valid for portshow fciptunnel only.
3)nsshow :
NAME
nsShow - Displays local Name Server information.
SYNOPSIS
nsshow [ -r -t ]
DESCRIPTION
Use this command to display local Name Server information
about devices connected to this switch.
The following message is displayed if there is no informa-
tion in this switch:
There is no entry in the Local Name Server
The nsAllShow command displays information from all
switches.
Each line of output displays:
Type U for unknown, N for N_Port, NL for NL_Port.
Pid 24-bit Fibre Channel address.
COS List of classes of service supported by device.
PortName Device port World Wide Name.
NodeName Device node World Wide Name.
TTL Time-to-live (in seconds) for cached entries, or
'NA' (not-applicable) if the entry is local. This is
displayed if "-r" option is not given.
SCR State change registration of the device. This is
displayed if "-r" option is given.
Device type Device type if "-t" option is given.
Permanent Port Name Physical N_Port or NL_Port World Wide Name.
Port Index The port index this device is attached to.
Shared Area Whether this device shares an area with other devices.
Device Shared in Other AD Whether device is shared in other AD.
There might be additional lines if the device has registered
any of the following information (the switch automatically
registers SCSI inquiry data for FCP target devices):
4)portcfgshow :
switch26:admin>
switch26:admin> portcfgshow
Ports of Slot 0 0 1 2 3 4 5 6 7
-----------------+--+--+--+--+----+--+--+--
Speed AN AN 2G AN AN AN AN AN
Trunk Port ON ON ON ON ON ON ON ..
Long Distance .. .. .. .. .. .. .. ..
VC Link Init .. .. .. .. .. .. .. ..
Locked L_Port .. ON .. .. ON .. .. ..
Locked G_Port .. .. ON .. .. ON .. ..
Disabled E_Port ON ON .. .. .. .. .. ..
ISL R_RDY Mode .. .. .. .. .. .. .. ..
RSCN Suppressed .. .. .. .. .. .. .. ..
Persistent Disable.. .. .. .. .. .. .. ..
NPIV capability .. .. .. .. .. .. .. ..
where AN:AutoNegotiate, ..:OFF, ??:INVALID,
SN:Software controlled AutoNegotiation.
LM:L0.5
switch26:admin>
5)ipaddrshow :
switch26:admin> ipaddrshow
SWITCH
Ethernet IP Address: 192.168.0.26
Ethernet Subnetmask: 255.255.255.0
Fibre Channel IP Address: none
Fibre Channel Subnetmask: none
Gateway IP Address: 192.168.0.254
DHCP: Off
switch26:admin>
ISL R_RDY Mode .. .. .. .. .. .. .. ..
RSCN Suppressed .. .. .. .. .. .. .. ..
Persistent Disable.. .. .. .. .. .. .. ..
NPIV capability .. .. .. .. .. .. .. ..
where AN:AutoNegotiate, ..:OFF, ??:INVALID,
SN:Software controlled AutoNegotiation.
LM:L0.5
6)licenseshow :
switch26:admin> licenseshow
RecbdezQeSgfdceI:
Web license
Zoning license
Fabric license
Remote Switch license
Extended Fabric license
Fabric Watch license
Performance Monitor license
Trunking license
switch26:admin>
7)timeout :
switch26:admin> timeout
Current IDLE Timeout is 15 minutes
switch26:admin> timeout 20
IDLE Timeout Changed to 20 minutes
The modified IDLE Timeout will be in effect after NEXT login
switch26:admin>
8)quietmode :
switch26:admin> quietmode
quietMode: Off
Usage: quietMode 0|1
0: to turn it off
1: to turn it on
switch26:admin>
9)psshow :
switch26:admin> psshow
Power Supply #1 is OK
switch26:admin>
10)fanshow :
Power Supply #1 is OK
switch26:admin> fanshow
Fan 1 is Ok, speed is 5443 RPM
Fan 2 is Ok, speed is 5443 RPM
Fan 3 is Ok, speed is 5443 RPM
switch26:admin>
11)tempshow :
switch26:admin> tempshow
Sensor State Centigrade Fahrenheit
ID
=================================================
1 Ok 35 95
2 Ok 33 91
3 Ok 33 91
4 Ok 30 86
switch26:admin>
12)Configure :
Configure...
System services (yes, y, no, n): [no] y
ssl attributes (yes, y, no, n): [no] y
Certificate File. (filename or none): [none]
CA Certificate File. (filename or none): [none]
Select length of crypto key.
(Valid values are 40, 56, and 128.): (40..128) [128]
snmp attributes (yes, y, no, n): [no]
rpcd attributes (yes, y, no, n): [no]
cfgload attributes (yes, y, no, n): [no]
webtools attributes (yes, y, no, n): [no]
System (yes, y, no, n): [no]
No changes.
switch26:admin>
13)portcfgspeed :
switch26:admin> portcfgspeed
Usage: portCfgSpeed PortNumber Speed_Level
Speed_Level: 0 - Auto Negotiate
1 - 1Gbps
2 - 2Gbps
4 - 4Gbps
switch26:admin>
14 )switchdisable & switchenable :
mnc:admin> switchdisable
mnc:admin> 0x101fede0 (tThad): Jun 19 17:57:28
WARNING FW-STATUS_SWITCH, 3, Switch status changed from HEALTHY/OK to Margin
al/Warning
mnc:admin> switchenable
Command in progress . . . . . . . . . . . . . . . . done
mnc:admin> 0x101fede0 (tThad): Jun 19 17:57:44
WARNING FW-STATUS_SWITCH, 3, Switch status changed from Marginal/Warning to
HEALTHY/OK
0x1020e270 (tFabric): Jun 19 17:57:53
INFO FABRIC-SWITCH_ROLE, 4, Principal switch
0x1020e270 (tFabric): Jun 19 17:57:53
INFO FABRIC-DOMAIN_INFO, 4, Domain 3
mnc:admin>
version :
switch26:admin> version
Kernel: 2.6.14
Fabric OS: v5.3.0
Made on: Thu Jun 14 19:04:04 2007
Flash: Thu Aug 9 20:28:44 2007
BootProm: 4.5.3
switch26:admin>
15)fastboot :
switch26:admin> fastboot
Broadcast message from root (pts/0) Sun Jun 19 17:35:32 2011...
The system is going down for reboot NOW !!
switch26:admin>
Connection to host lost.
C:\Documents and Settings\admin>
switch26:admin> switchshow
switchName: switch26
switchType: 27.2
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 26
switchId: fffc1a
switchWwn: 10:00:00:05:1e:34:ff:ab
zoning: ON (cfg4)
switchBeacon: ON
Area Port Media Speed State Proto
=====================================
0 0 id N1 Online L-Port 9 public
1 1 id N2 No_Light
2 2 id 2G No_Light
3 3 id N2 No_Light
4 4 id N2 No_Light
5 5 id N1 Online E-Port 10:00:00:60:69:c0:7e:c4 "switch24"
(upstream)
6 6 id N2 No_Light
7 7 id N1 Online E-Port 10:00:00:60:69:c0:7e:c4 "switch24"
switch26:admin>
2)portshow :
switch26:admin> portshow
Usage:
portshow [<SlotNumber>/]<PortNumber>
OR
portshow [ipif|arp|iproute|fciptunnel|iscsi|mode]
[<SlotNumber>/]ge<PortNumber> [<Args>] [<Optional Args>]
Args: all|<tunnel_id> - Show All/<tunnel_id> FCIP tunnels on this GigE port.
Optional Args: -perf Additional performance information.
Valid for portshow fciptunnel only.
-params Connection parameter information.
Valid for portshow fciptunnel only.
-ipsec IKE and IPSec policy information
on IPSec enabled tunnels.
Valid for portshow fciptunnel only.
3)nsshow :
NAME
nsShow - Displays local Name Server information.
SYNOPSIS
nsshow [ -r -t ]
DESCRIPTION
Use this command to display local Name Server information
about devices connected to this switch.
The following message is displayed if there is no informa-
tion in this switch:
There is no entry in the Local Name Server
The nsAllShow command displays information from all
switches.
Each line of output displays:
Type U for unknown, N for N_Port, NL for NL_Port.
Pid 24-bit Fibre Channel address.
COS List of classes of service supported by device.
PortName Device port World Wide Name.
NodeName Device node World Wide Name.
TTL Time-to-live (in seconds) for cached entries, or
'NA' (not-applicable) if the entry is local. This is
displayed if "-r" option is not given.
SCR State change registration of the device. This is
displayed if "-r" option is given.
Device type Device type if "-t" option is given.
Permanent Port Name Physical N_Port or NL_Port World Wide Name.
Port Index The port index this device is attached to.
Shared Area Whether this device shares an area with other devices.
Device Shared in Other AD Whether device is shared in other AD.
There might be additional lines if the device has registered
any of the following information (the switch automatically
registers SCSI inquiry data for FCP target devices):
4)portcfgshow :
switch26:admin>
switch26:admin> portcfgshow
Ports of Slot 0 0 1 2 3 4 5 6 7
-----------------+--+--+--+--+----+--+--+--
Speed AN AN 2G AN AN AN AN AN
Trunk Port ON ON ON ON ON ON ON ..
Long Distance .. .. .. .. .. .. .. ..
VC Link Init .. .. .. .. .. .. .. ..
Locked L_Port .. ON .. .. ON .. .. ..
Locked G_Port .. .. ON .. .. ON .. ..
Disabled E_Port ON ON .. .. .. .. .. ..
ISL R_RDY Mode .. .. .. .. .. .. .. ..
RSCN Suppressed .. .. .. .. .. .. .. ..
Persistent Disable.. .. .. .. .. .. .. ..
NPIV capability .. .. .. .. .. .. .. ..
where AN:AutoNegotiate, ..:OFF, ??:INVALID,
SN:Software controlled AutoNegotiation.
LM:L0.5
switch26:admin>
5)ipaddrshow :
switch26:admin> ipaddrshow
SWITCH
Ethernet IP Address: 192.168.0.26
Ethernet Subnetmask: 255.255.255.0
Fibre Channel IP Address: none
Fibre Channel Subnetmask: none
Gateway IP Address: 192.168.0.254
DHCP: Off
switch26:admin>
ISL R_RDY Mode .. .. .. .. .. .. .. ..
RSCN Suppressed .. .. .. .. .. .. .. ..
Persistent Disable.. .. .. .. .. .. .. ..
NPIV capability .. .. .. .. .. .. .. ..
where AN:AutoNegotiate, ..:OFF, ??:INVALID,
SN:Software controlled AutoNegotiation.
LM:L0.5
6)licenseshow :
switch26:admin> licenseshow
RecbdezQeSgfdceI:
Web license
Zoning license
Fabric license
Remote Switch license
Extended Fabric license
Fabric Watch license
Performance Monitor license
Trunking license
switch26:admin>
7)timeout :
switch26:admin> timeout
Current IDLE Timeout is 15 minutes
switch26:admin> timeout 20
IDLE Timeout Changed to 20 minutes
The modified IDLE Timeout will be in effect after NEXT login
switch26:admin>
8)quietmode :
switch26:admin> quietmode
quietMode: Off
Usage: quietMode 0|1
0: to turn it off
1: to turn it on
switch26:admin>
9)psshow :
switch26:admin> psshow
Power Supply #1 is OK
switch26:admin>
10)fanshow :
Power Supply #1 is OK
switch26:admin> fanshow
Fan 1 is Ok, speed is 5443 RPM
Fan 2 is Ok, speed is 5443 RPM
Fan 3 is Ok, speed is 5443 RPM
switch26:admin>
11)tempshow :
switch26:admin> tempshow
Sensor State Centigrade Fahrenheit
ID
=================================================
1 Ok 35 95
2 Ok 33 91
3 Ok 33 91
4 Ok 30 86
switch26:admin>
12)Configure :
Configure...
System services (yes, y, no, n): [no] y
ssl attributes (yes, y, no, n): [no] y
Certificate File. (filename or none): [none]
CA Certificate File. (filename or none): [none]
Select length of crypto key.
(Valid values are 40, 56, and 128.): (40..128) [128]
snmp attributes (yes, y, no, n): [no]
rpcd attributes (yes, y, no, n): [no]
cfgload attributes (yes, y, no, n): [no]
webtools attributes (yes, y, no, n): [no]
System (yes, y, no, n): [no]
No changes.
switch26:admin>
13)portcfgspeed :
switch26:admin> portcfgspeed
Usage: portCfgSpeed PortNumber Speed_Level
Speed_Level: 0 - Auto Negotiate
1 - 1Gbps
2 - 2Gbps
4 - 4Gbps
switch26:admin>
14 )switchdisable & switchenable :
mnc:admin> switchdisable
mnc:admin> 0x101fede0 (tThad): Jun 19 17:57:28
WARNING FW-STATUS_SWITCH, 3, Switch status changed from HEALTHY/OK to Margin
al/Warning
mnc:admin> switchenable
Command in progress . . . . . . . . . . . . . . . . done
mnc:admin> 0x101fede0 (tThad): Jun 19 17:57:44
WARNING FW-STATUS_SWITCH, 3, Switch status changed from Marginal/Warning to
HEALTHY/OK
0x1020e270 (tFabric): Jun 19 17:57:53
INFO FABRIC-SWITCH_ROLE, 4, Principal switch
0x1020e270 (tFabric): Jun 19 17:57:53
INFO FABRIC-DOMAIN_INFO, 4, Domain 3
mnc:admin>
version :
switch26:admin> version
Kernel: 2.6.14
Fabric OS: v5.3.0
Made on: Thu Jun 14 19:04:04 2007
Flash: Thu Aug 9 20:28:44 2007
BootProm: 4.5.3
switch26:admin>
15)fastboot :
switch26:admin> fastboot
Broadcast message from root (pts/0) Sun Jun 19 17:35:32 2011...
The system is going down for reboot NOW !!
switch26:admin>
Connection to host lost.
C:\Documents and Settings\admin>
No comments:
Post a Comment